Rietveld Code Review Tool
Help | Bug tracker | Discussion group | Source code

Side by Side Diff: modules/statsmaster/templates/awstats.conf

Issue 29464559: #1538 - Remove class statsmaster and associated resources (Closed)
Patch Set: Created June 13, 2017, 9:43 a.m.
Left:
Right:
Use n/p to move between diff chunks; N/P to move between comments.
Jump to:
View unified diff | Download patch
OLDNEW
(Empty)
1 #-----------------------------------------------------------------------------
2 # MAIN SETUP SECTION (Required to make AWStats work)
3 #-----------------------------------------------------------------------------
4
5 # "LogFile" contains the web, ftp or mail server log file to analyze.
6 # Possible values: A full path, or a relative path from awstats.pl directory.
7 # Example: "/var/log/apache/access.log"
8 # Example: "../logs/mycombinedlog.log"
9 # You can also use tags in this filename if you need a dynamic file name
10 # depending on date or time (Replacement is made by AWStats at the beginning
11 # of its execution). This is available tags :
12 # %YYYY-n is replaced with 4 digits year we were n hours ago
13 # %YY-n is replaced with 2 digits year we were n hours ago
14 # %MM-n is replaced with 2 digits month we were n hours ago
15 # %MO-n is replaced with 3 letters month we were n hours ago
16 # %DD-n is replaced with day we were n hours ago
17 # %HH-n is replaced with hour we were n hours ago
18 # %NS-n is replaced with number of seconds at 00:00 since 1970
19 # %WM-n is replaced with the week number in month (1-5)
20 # %Wm-n is replaced with the week number in month (0-4)
21 # %WY-n is replaced with the week number in year (01-52)
22 # %Wy-n is replaced with the week number in year (00-51)
23 # %DW-n is replaced with the day number in week (1-7, 1=sunday)
24 # use n=24 if you need (1-7, 1=monday)
25 # %Dw-n is replaced with the day number in week (0-6, 0=sunday)
26 # use n=24 if you need (0-6, 0=monday)
27 # Use 0 for n if you need current year, month, day, hour...
28 # Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
29 # Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
30 # You can also use a pipe if log file come from a pipe :
31 # Example: "gzip -d </var/log/apache/access.log.gz |"
32 # If there are several log files from load balancing servers :
33 # Example: "/pathtotools/logresolvemerge.pl *.log |"
34 #
35 LogFile="ssh <%= host %> <%= log %>.1.gz | gzip -cd |"
36
37 # Enter the log file type you want to analyze.
38 # Possible values:
39 # W - For a web log file
40 # S - For a streaming log file
41 # M - For a mail log file
42 # F - For a ftp log file
43 # Example: W
44 # Default: W
45 #
46 LogType=W
47
48
49 # Enter here your log format (Must match your web server config. See setup
50 # instructions in documentation to know how to configure your web server to
51 # have the required log format).
52 # Possible values: 1,2,3,4 or "your_own_personalized_log_format"
53 # 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF /ELF log format)
54 # 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
55 # 3 - Webstar native log format.
56 # 4 - Apache or Squid native common log format (NCSA common/CLF log format)
57 # With LogFormat=4, some features (browsers, os, keywords...) can't work.
58 # "your_own_personalized_log_format" = If your log is ftp, mail or other format,
59 # you must use following keys to define the log format string (See FAQ for
60 # ftp, mail or exotic web log format examples):
61 # %host Client hostname or IP address (or Sender host for mail log )
62 # %host_r Receiver hostname or IP address (for mail log)
63 # %lognamequot Authenticated login/user with format: "john"
64 # %logname Authenticated login/user with format: john
65 # %time1 Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
66 # %time2 Date and time with format: yyyy-mm-dd hh:mm:ss
67 # %time3 Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm :ss yyyy
68 # %time4 Date and time with unix timestamp format: dddddddddd
69 # %methodurl Method and URL with format: "GET /index.html HTTP/x.x"
70 # %methodurlnoprot Method and URL with format: "GET /index.html"
71 # %method Method with format: GET
72 # %url URL only with format: /index.html
73 # %query Query string (used by URLWithQuery option)
74 # %code Return code status (with format for web log: 999)
75 # %bytesd Size of document in bytes
76 # %refererquot Referer page with format: "http://from.com/from.htm"
77 # %referer Referer page with format: http://from.com/from.htm
78 # %uabracket User agent with format: [Mozilla/4.0 (compatible, ...)]
79 # %uaquot User agent with format: "Mozilla/4.0 (compatible, ...)"
80 # %ua User agent with format: Mozilla/4.0_(compatible...)
81 # %gzipin mod_gzip compression input bytes: In:XXX
82 # %gzipout mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
83 # %gzipratio mod_gzip compression ratio: ZZpct.
84 # %deflateratio mod_deflate compression ratio with format: (ZZ)
85 # %email EMail sender (for mail log)
86 # %email_r EMail receiver (for mail log)
87 # %virtualname Web sever virtual hostname. Use this tag when same log
88 # contains data of several virtual web servers. AWStats
89 # will discard records not in SiteDomain nor HostAliases
90 # %cluster If log file is provided from several computers (merged by
91 # logresolvemerge.pl), use this to define cluster id field.
92 # %extraX Another field that you plan to use for building a
93 # personalized report with ExtraSection feature (See later).
94 # If your log format has some fields not included in this list, use:
95 # %other Means another not used field
96 # %otherquot Means another not used double quoted field
97 #
98 # Examples for Apache combined logs (following two examples are equivalent):
99 # LogFormat = 1
100 # LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquo t %uaquot"
101 #
102 # Example for IIS:
103 # LogFormat = 2
104 #
105 LogFormat=1
106
107
108 # If your log field's separator is not a space, you can change this parameter.
109 # This parameter is not used if LogFormat is a predefined value (1,2,3,4)
110 # Backslash can be used as escape character.
111 # Example: " "
112 # Example: "\t"
113 # Example: "\|"
114 # Example: ","
115 # Default: " "
116 #
117 LogSeparator=" "
118
119
120 # "SiteDomain" must contain the main domain name, or the main intranet web
121 # server name, used to reach the web site.
122 # If you share the same log file for several virtual web servers, this
123 # parameter is used to tell AWStats to filter record that contains records for
124 # this virtual host name only (So check that this virtual hostname can be
125 # found in your log file and use a personalized log format that include the
126 # %virtualname tag).
127 # But for multi hosting a better solution is to have one log file for each
128 # virtual web server. In this case, this parameter is only used to generate
129 # full URL's links when ShowLinksOnUrl option is set to 1.
130 # If analyzing mail log, enter here the domain name of mail server.
131 # Example: "myintranetserver"
132 # Example: "www.domain.com"
133 # Example: "ftp.domain.com"
134 # Example: "domain.com"
135 #
136 SiteDomain="<%= title %>"
137
138
139 # Enter here all other possible domain names, addresses or virtual host
140 # aliases someone can use to access your site. Try to keep only the minimum
141 # number of possible names/addresses to have the best performances.
142 # You can repeat the "SiteDomain" value in this list.
143 # This parameter is used to analyze referer field in log file and to help
144 # AWStats to know if a referer URL is a local URL of same site or an URL of
145 # another site.
146 # Note: Use space between each value.
147 # Note: You can use regular expression values writing value with REGEX[value].
148 # Note: You can also use @/mypath/myfile if list of aliases are in a file.
149 # Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
150 #
151 HostAliases="<%= title %>"
152
153
154 # If you want to have hosts reported by name instead of ip address, AWStats
155 # need to make reverse DNS lookups (if not already done in your log file).
156 # With DNSLookup to 0, all hosts will be reported by their IP addresses and
157 # not by the full hostname of visitors (except if names are already available
158 # in log file).
159 # If you want/need to set DNSLookup to 1, don't forget that this will reduce
160 # dramatically AWStats update process speed. Do not use on large web sites.
161 # Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
162 # Note: Result of DNS Lookup can be used to build the Country report. However
163 # it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
164 # have an accurate Country report with no need of DNS Lookup.
165 # Possible values:
166 # 0 - No DNS Lookup
167 # 1 - DNS Lookup is fully enabled
168 # 2 - DNS Lookup is made only from static DNS cache file (if it exists)
169 # Default: 2
170 #
171 DNSLookup=0
172
173
174 # When AWStats updates its statistics, it stores results of its analysis in
175 # files (AWStats database). All those files are written in the directory
176 # defined by the "DirData" parameter. Set this value to the directory where
177 # you want AWStats to save its database and working files into.
178 # Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
179 # feature (see later), you need "Write" permissions by web server user on this
180 # directory (and "Modify" for Windows NTFS file systems).
181 # Example: "/var/lib/awstats"
182 # Example: "../data"
183 # Example: "C:/awstats_data_dir"
184 # Default: "." (means same directory as awstats.pl)
185 #
186 DirData="__AWSTATSDATA__/<%= title %>"
187
188 # Relative or absolute web URL of your awstats cgi-bin directory.
189 # This parameter is used only when AWStats is run from command line
190 # with -output option (to generate links in HTML reported page).
191 # Example: "/awstats"
192 # Default: "/cgi-bin" (means awstats.pl is in "/yourwwwroot/cgi-bin")
193 #
194 DirCgi="/web/<%= title %>"
195
196
197 # Relative or absolute web URL of your awstats icon directory.
198 # If you build static reports ("... -output > outputpath/output.html"), enter
199 # path of icon directory relative to the output directory 'outputpath'.
200 # Example: "/awstatsicons"
201 # Example: "../icon"
202 # Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
203 #
204 DirIcons="/web/icons"
205
206
207 # When this parameter is set to 1, AWStats adds a button on report page to
208 # allow to "update" statistics from a web browser. Warning, when "update" is
209 # made from a browser, AWStats is run as a CGI by the web server user defined
210 # in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
211 # IIS), so the "DirData" directory and all already existing history files
212 # awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
213 # necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
214 # Warning: Update process can be long so you might experience "time out"
215 # browser errors if you don't launch AWStats frequently enough.
216 # When set to 0, update is only made when AWStats is run from the command
217 # line interface (or a task scheduler).
218 # Possible values: 0 or 1
219 # Default: 0
220 #
221 AllowToUpdateStatsFromBrowser=0
222
223
224 # AWStats saves and sorts its database on a month basis (except if using
225 # databasebreak option from command line).
226 # However, if you choose the -month=all from command line or
227 # value '-Year-' from CGI combo form to have a report for all year, AWStats
228 # needs to reload all data for full year (each month), and sort them,
229 # requiring a large amount of time, memory and CPU. This might be a problem
230 # for web hosting providers that offer AWStats for large sites, on shared
231 # servers, to non CPU cautious customers.
232 # For this reason, the 'full year' is only enabled on Command Line by default.
233 # You can change this by setting this parameter to 0, 1, 2 or 3.
234 # Possible values:
235 # 0 - Never allowed
236 # 1 - Allowed on CLI only, -Year- value in combo is not visible
237 # 2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
238 # 3 - Possible on CLI and CGI
239 # Default: 2
240 #
241 AllowFullYearView=2
242
243
244
245 #-----------------------------------------------------------------------------
246 # OPTIONAL SETUP SECTION (Not required but increase AWStats features)
247 #-----------------------------------------------------------------------------
248
249 # When the update process runs, AWStats can set a lock file in TEMP or TMP
250 # directory. This lock is to avoid to have 2 update processes running at the
251 # same time to prevent unknown conflicts problems and avoid DoS attacks when
252 # AllowToUpdateStatsFromBrowser is set to 1.
253 # Because, when you use lock file, you can experience sometimes problems in
254 # lock file not correctly removed (killed process for example requires that
255 # you remove the file manualy), this option is not enabled by default (Do
256 # not enable this option with no console server access).
257 # Change : Effective immediatly
258 # Possible values: 0 or 1
259 # Default: 0
260 #
261 EnableLockForUpdate=0
262
263
264 # AWStats can do reverse DNS lookups through a static DNS cache file that was
265 # previously created manually. If no path is given in static DNS cache file
266 # name, AWStats will search DirData directory. This file is never changed.
267 # This option is not used if DNSLookup=0.
268 # Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
269 # or just 'ipaddress resolved_hostname'
270 # Change : Effective for new updates only
271 # Example: "/mydnscachedir/dnscache"
272 # Default: "dnscache.txt"
273 #
274 DNSStaticCacheFile="dnscache.txt"
275
276
277 # AWStats can do reverse DNS lookups through a DNS cache file that was created
278 # by a previous run of AWStats. This file is erased and recreated after each
279 # statistics update process. You don't need to create and/or edit it.
280 # AWStats will read and save this file in DirData directory.
281 # This option is used only if DNSLookup=1.
282 # Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
283 # lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
284 # Change : Effective for new updates only
285 # Example: "/mydnscachedir/dnscachelastupdate"
286 # Default: "dnscachelastupdate.txt"
287 #
288 DNSLastUpdateCacheFile="dnscachelastupdate.txt"
289
290
291 # You can specify specific IP addresses that should NOT be looked up in DNS.
292 # This option is used only if DNSLookup=1.
293 # Note: Use space between each value.
294 # Note: You can use regular expression values writing value with REGEX[value].
295 # Change : Effective for new updates only
296 # Example: "123.123.123.123 REGEX[^192\.168\.]"
297 # Default: ""
298 #
299 SkipDNSLookupFor=""
300
301
302 # The following two parameters allow you to protect a config file from being
303 # read by AWStats when called from a browser if web user has not been
304 # authenticated. Your AWStats program must be in a web protected "realm" (With
305 # Apache, you can use .htaccess files to do so. With other web servers, see
306 # your server setup manual).
307 # Change : Effective immediatly
308 # Possible values: 0 or 1
309 # Default: 0
310 #
311 AllowAccessFromWebToAuthenticatedUsersOnly=0
312
313
314 # This parameter gives the list of all authorized authenticated users to view
315 # statistics for this domain/config file. This parameter is used only if
316 # AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
317 # Change : Effective immediatly
318 # Example: "user1 user2"
319 # Example: "__REMOTE_USER__"
320 # Default: ""
321 #
322 AllowAccessFromWebToFollowingAuthenticatedUsers=""
323
324
325 # When this parameter is defined to something, the IP address of the user that
326 # reads its statistics from a browser (when AWStats is used as a CGI) is
327 # checked and must match one of the IP address values or ranges.
328 # Change : Effective immediatly
329 # Example: "127.0.0.1 123.123.123.1-123.123.123.255"
330 # Default: ""
331 #
332 AllowAccessFromWebToFollowingIPAddresses=""
333
334
335 # If the "DirData" directory (see above) does not exist, AWStats return an
336 # error. However, you can ask AWStats to create it.
337 # This option can be used by some Web Hosting Providers that has defined a
338 # dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
339 # don't want to have to create a new directory each time they add a new user.
340 # Change : Effective immediatly
341 # Possible values: 0 or 1
342 # Default: 0
343 #
344 CreateDirDataIfNotExists=0
345
346
347 # You can choose in which format the Awstats history database is saved.
348 # Note: Using "xml" format make AWStats building database files three times
349 # larger than using "text" format.
350 # Change : Database format is switched after next update
351 # Possible values: text or xml
352 # Default: text
353 #
354 BuildHistoryFormat=text
355
356
357 # If you prefer having the report output pages be built as XML compliant pages
358 # instead of simple HTML pages, you can set this to 'xhtml' (May not work
359 # properly with old browsers).
360 # Change : Effective immediatly
361 # Possible values: html or xhtml
362 # Default: html
363 #
364 BuildReportFormat=html
365
366
367 # AWStats databases can be updated from command line of from a browser (when
368 # used as a cgi program). So AWStats database files need write permission
369 # for both command line user and default web server user (nobody for Unix,
370 # IUSR_xxx for IIS/Windows,...).
371 # To avoid permission problems between update process (run by an admin user)
372 # and CGI process (ran by a low level user), AWStats can save its database
373 # files with read and write permissions for everyone.
374 # By default, AWStats keeps default user permissions on updated files. If you
375 # set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
376 # Change : Effective for new updates only
377 # Possible values: 0 or 1
378 # Default: 0
379 #
380 SaveDatabaseFilesWithPermissionsForEveryone=0
381
382
383 # AWStats can purge log file, after analyzing it. Note that AWStats is able
384 # to detect new lines in a log file, to process only them, so you can launch
385 # AWStats as often as you want, even with this parameter to 0.
386 # With 0, no purge is made, so you must use a scheduled task or a web server
387 # that make this purge frequently.
388 # With 1, the purge of the log file is made each time AWStats update is run.
389 # This parameter doesn't work with IIS (This web server doesn't let its log
390 # file to be purged).
391 # Change : Effective for new updates only
392 # Possible values: 0 or 1
393 # Default: 0
394 #
395 PurgeLogFile=0
396
397
398 # When PurgeLogFile is setup to 1, AWStats will clean your log file after
399 # processing it. You can however keep an archive file of all processed log
400 # records by setting this parameter (For example if you want to use another
401 # log analyzer). The archived log file is saved in "DirData" with name
402 # awstats_archive.configname[.suffix].log
403 # This parameter is not used if PurgeLogFile=0
404 # Change : Effective for new updates only
405 # Possible values: 0, 1, or tags (See LogFile parameter) for suffix
406 # Example: 1
407 # Example: %YYYY%MM%DD
408 # Default: 0
409 #
410 ArchiveLogRecords=0
411
412
413 # Each time you run the update process, AWStats overwrites the 'historic file'
414 # for the month (awstatsMMYYYY[.*].txt) with the updated one.
415 # When write errors occurs (IO, disk full,...), this historic file can be
416 # corrupted and must be deleted. Because this file contains information of all
417 # past processed log files, you will loose old stats if removed. So you can
418 # ask AWStats to save last non corrupted file in a .bak file. This file is
419 # stored in "DirData" directory with other 'historic files'.
420 # Change : Effective for new updates only
421 # Possible values: 0 or 1
422 # Default: 0
423 #
424 KeepBackupOfHistoricFiles=0
425
426
427 # Default index page name for your web server.
428 # Change : Effective for new updates only
429 # Example: "index.php index.html default.html"
430 # Default: "index.html"
431 #
432 DefaultFile="index.html"
433
434
435 # Do not include access from clients that match following criteria.
436 # If your log file contains IP addresses in host field, you must enter here
437 # matching IP addresses criteria.
438 # If DNS lookup is already done in your log file, you must enter here hostname
439 # criteria, else enter ip address criteria.
440 # The opposite parameter of "SkipHosts" is "OnlyHosts".
441 # Note: Use space between each value. This parameter is not case sensitive.
442 # Note: You can use regular expression values writing value with REGEX[value].
443 # Change : Effective for new updates only
444 # Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
445 # Example: "localhost REGEX[^.*\.localdomain$]"
446 # Default: ""
447 #
448 SkipHosts=""
449
450
451 # Do not include access from clients with a user agent that match following
452 # criteria. If you want to exclude a robot, you should update the robots.pm
453 # file instead of this parameter.
454 # The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
455 # Note: Use space between each value. This parameter is not case sensitive.
456 # Note: You can use regular expression values writing value with REGEX[value].
457 # Change : Effective for new updates only
458 # Example: "konqueror REGEX[ua_test_v\d\.\d]"
459 # Default: ""
460 #
461 SkipUserAgents=""
462
463
464 # Use SkipFiles to ignore access to URLs that match one of following entries.
465 # You can enter a list of not important URLs (like framed menus, hidden pages,
466 # etc...) to exclude them from statistics. You must enter here exact relative
467 # URL as found in log file, or a matching REGEX value. Check apply on URL with
468 # all its query paramaters.
469 # For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
470 # pages in a particular directory, add "REGEX[^\/directorytoexclude]".
471 # The opposite parameter of "SkipFiles" is "OnlyFiles".
472 # Note: Use space between each value. This parameter is or not case sensitive
473 # depending on URLNotCaseSensitive parameter.
474 # Note: You can use regular expression values writing value with REGEX[value].
475 # Change : Effective for new updates only
476 # Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
477 # Default: ""
478 #
479 SkipFiles="REGEX[^\/getSubscription\?]"
480
481
482 # Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
483 # referrer. Parameter must receive a local file name containing rules applied
484 # on referrer field. If parameter is empty, no filter is applied.
485 # An example of such a file is available in lib/blacklist.txt
486 # You can download updated version at http://www.jayallen.org/comment_spam/
487 # Change : Effective for new updates only
488 # Example: "/mylibpath/blacklist.txt"
489 # Default: ""
490 #
491 # WARNING!! Using this feature make AWStats running very slower (5 times slower
492 # with black list file provided with AWStats !
493 #
494 SkipReferrersBlackList=""
495
496
497 # Include in stats, only accesses from hosts that match one of following
498 # entries. For example, if you want AWStats to filter access to keep only
499 # stats for visits from particular hosts, you can add those host names in
500 # this parameter.
501 # If DNS lookup is already done in your log file, you must enter here hostname
502 # criteria, else enter ip address criteria.
503 # The opposite parameter of "OnlyHosts" is "SkipHosts".
504 # Note: Use space between each value. This parameter is not case sensitive.
505 # Note: You can use regular expression values writing value with REGEX[value].
506 # Change : Effective for new updates only
507 # Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
508 # Default: ""
509 #
510 OnlyHosts=""
511
512
513 # Include in stats, only accesses from user agent that match one of following
514 # entries. For example, if you want AWStats to filter access to keep only
515 # stats for visits from particular browsers, you can add their user agents
516 # string in this parameter.
517 # The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
518 # Note: Use space between each value. This parameter is not case sensitive.
519 # Note: You can use regular expression values writing value with REGEX[value].
520 # Change : Effective for new updates only
521 # Example: "msie"
522 # Default: ""
523 #
524 OnlyUserAgents=""
525
526
527 # Include in stats, only accesses to URLs that match one of following entries.
528 # For example, if you want AWStats to filter access to keep only stats that
529 # match a particular string, like a particular directory, you can add this
530 # directory name in this parameter.
531 # The opposite parameter of "OnlyFiles" is "SkipFiles".
532 # Note: Use space between each value. This parameter is or not case sensitive
533 # depending on URLNotCaseSensitive parameter.
534 # Note: You can use regular expression values writing value with REGEX[value].
535 # Change : Effective for new updates only
536 # Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
537 # Default: ""
538 #
539 OnlyFiles=""
540
541
542 # Add here a list of kind of url (file extension) that must be counted as
543 # "Hit only" and not as a "Hit" and "Page/Download". You can set here all
544 # image extensions as they are hit downloaded that must be counted but they
545 # are not viewed pages. URLs with such extensions are not included in the TOP
546 # Pages/URL report.
547 # Note: If you want to exclude particular URLs from stats (No Pages and no
548 # Hits reported), you must use SkipFiles parameter.
549 # Change : Effective for new updates only
550 # Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
551 # Example: ""
552 # Default: "css js class gif jpg jpeg png bmp ico"
553 #
554 NotPageList="css js class gif jpg jpeg png bmp ico swf xml rdf woff otf ttf"
555
556
557 # By default, AWStats considers that records found in web log file are
558 # successful hits if HTTP code returned by server is a valid HTTP code (200
559 # and 304). Any other code are reported in HTTP status chart.
560 # Note that HTTP 'control codes', like redirection (302, 305) are not added by
561 # default in this list as they are not pages seen by a visitor but are
562 # protocol exchange codes to tell the browser to ask another page. Because
563 # this other page will be counted and seen with a 200 or 304 code, if you
564 # add such codes, you will have 2 pages viewed reported for only one in facts.
565 # Change : Effective for new updates only
566 # Example: "200 304 302 305"
567 # Default: "200 304"
568 #
569 ValidHTTPCodes="200 304"
570
571
572 # By default, AWStats considers that records found in mail log file are
573 # successful mail transfers if field that represent return code in analyzed
574 # log file match values defined by this parameter.
575 # Change : Effective for new updates only
576 # Example: "1 250 200"
577 # Default: "1 250"
578 #
579 ValidSMTPCodes="1 250"
580
581
582 # Some web servers on some Operating systems (IIS-Windows) consider that a
583 # login with same value but different case are the same login. To tell AWStats
584 # to also consider them as one, set this parameter to 1.
585 # Change : Effective for new updates only
586 # Possible values: 0 or 1
587 # Default: 0
588 #
589 AuthenticatedUsersNotCaseSensitive=0
590
591
592 # Some web servers on some Operating systems (IIS-Windows) considers that two
593 # URLs with same value but different case are the same URL. To tell AWStats to
594 # also considers them as one, set this parameter to 1.
595 # Change : Effective for new updates only
596 # Possible values: 0 or 1
597 # Default: 0
598 #
599 URLNotCaseSensitive=0
600
601
602 # Keep or remove the anchor string you can find in some URLs.
603 # Change : Effective for new updates only
604 # Possible values: 0 or 1
605 # Default: 0
606 #
607 URLWithAnchor=0
608
609
610 # In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
611 # /mypage.html?param1=value1&param2=value2
612 # However, some servers/sites use also other chars to isolate dynamic part of
613 # their URLs. You can complete this list with all such characters.
614 # Change : Effective for new updates only
615 # Example: "?;,"
616 # Default: "?;"
617 #
618 URLQuerySeparators="?;"
619
620
621 # Keep or remove the query string to the URL in the statistics for individual
622 # pages. This is primarily used to differentiate between the URLs of dynamic
623 # pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
624 # different pages.
625 # Warning, when set to 1, memory required to run AWStats is dramatically
626 # increased if you have a lot of changing URLs (for example URLs with a random
627 # id inside). Such web sites should not set this option to 1 or use seriously
628 # the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually
629 # URLWithQueryWithoutFollowingParameters).
630 # Change : Effective for new updates only
631 # Possible values:
632 # 0 - URLs are cleaned from the query string (ie: "/mypage.html")
633 # 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y")
634 # Default: 0
635 #
636 URLWithQuery=0
637
638
639 # When URLWithQuery is on, you will get the full URL with all parameters in
640 # URL reports. But among thoose parameters, sometimes you don't need a
641 # particular parameter because it does not identify the page or because it's
642 # a random ID changing for each access even if URL points to same page. In
643 # such cases, it is higly recommanded to ask AWStats to keep only parameters
644 # you need (if you know them) before counting, manipulating and storing URL.
645 # Enter here list of wanted parameters. For example, with "param", one hit on
646 # /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r
647 # will be reported as 2 hits on /mypage.cgi?param=abc
648 # This parameter is not used when URLWithQuery is 0 and can't be used with
649 # URLWithQueryWithoutFollowingParameters.
650 # Change : Effective for new updates only
651 # Example: "param"
652 # Default: ""
653 #
654 URLWithQueryWithOnlyFollowingParameters=""
655
656
657 # When URLWithQuery is on, you will get the full URL with all parameters in
658 # URL reports. But among thoose parameters, sometimes you don't need a
659 # particular parameter because it does not identify the page or because it's
660 # a random ID changing for each access even if URL points to same page. In
661 # such cases, it is higly recommanded to ask AWStats to remove such parameters
662 # from the URL before counting, manipulating and storing URL. Enter here list
663 # of all non wanted parameters. For example if you enter "id", one hit on
664 # /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r
665 # will be reported as 2 hits on /mypage.cgi?param=abc
666 # This parameter is not used when URLWithQuery is 0 and can't be used with
667 # URLWithQueryWithOnlyFollowingParameters.
668 # Change : Effective for new updates only
669 # Example: "PHPSESSID jsessionid"
670 # Default: ""
671 #
672 URLWithQueryWithoutFollowingParameters=""
673
674
675 # Keep or remove the query string to the referrer URL in the statistics for
676 # external referrer pages. This is used to differentiate between the URLs of
677 # dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
678 # are counted as two different referrer pages.
679 # Change : Effective for new updates only
680 # Possible values:
681 # 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
682 # 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y")
683 # Default: 0
684 #
685 URLReferrerWithQuery=0
686
687
688 # AWStats can detect setup problems or show you important informations to have
689 # a better use. Keep this to 1, except if AWStats says you can change it.
690 # Change : Effective immediatly
691 # Possible values: 0 or 1
692 # Default: 1
693 #
694 WarningMessages=1
695
696
697 # When an error occurs, AWStats outputs a message related to errors. If you
698 # want (in most cases for security reasons) to have no error messages, you
699 # can set this parameter to your personalized generic message.
700 # Change : Effective immediatly
701 # Example: "An error occurred. Contact your Administrator"
702 # Default: ""
703 #
704 ErrorMessages=""
705
706
707 # AWStat can be run with debug=x parameter to output various informations
708 # to help in debugging or solving troubles. If you want to allow this (not
709 # enabled by default for security reasons), set this parameter to 0.
710 # Change : Effective immediatly
711 # Possible values: 0 or 1
712 # Default: 0
713 #
714 DebugMessages=0
715
716
717 # To help you to detect if your log format is good, AWStats reports an error
718 # if all the first NbOfLinesForCorruptedLog lines have a format that does not
719 # match the LogFormat parameter.
720 # However, some worm virus attack on your web server can result in a very high
721 # number of corrupted lines in your log. So if you experience awstats stop
722 # because of bad virus records at the beginning of your log file, you can
723 # increase this parameter (very rare).
724 # Change : Effective for new updates only
725 # Default: 50
726 #
727 NbOfLinesForCorruptedLog=50
728
729
730 # For some particular integration needs, you may want to have CGI links to
731 # point to another script than awstats.pl.
732 # Use the name of this script in WrapperScript parameter.
733 # Change : Effective immediatly
734 # Example: "awstatslauncher.pl"
735 # Default: ""
736 #
737 WrapperScript=""
738
739
740 # DecodeUA must be set to 1 if you use Roxen web server. This server converts
741 # all spaces in user agent field into %20. This make the AWStats robots, OS
742 # and browsers detection fail in some cases. Just change it to 1 if and only
743 # if your web server is Roxen.
744 # Change : Effective for new updates only
745 # Possible values: 0 or 1
746 # Default: 0
747 #
748 DecodeUA=0
749
750
751 # MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
752 # things, that can not be tracked on other way, like:
753 # - Javascript disabled
754 # - Java enabled
755 # - Screen size
756 # - Color depth
757 # - Macromedia Director plugin
758 # - Macromedia Shockwave plugin
759 # - Realplayer G2 plugin
760 # - QuickTime plugin
761 # - Mediaplayer plugin
762 # - Acrobat PDF plugin
763 # To enable all these features, you must copy the awstats_misc_tracker.js file
764 # into a /js/ directory stored in your web document root and add the following
765 # HTML code at the end of your index page (but before </BODY>) :
766 #
767 # <script language=javascript src="/js/awstats_misc_tracker.js"></script>
768 # <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 borde r=0 style="display: none"></noscript>
769 #
770 # If code is not added in index page, all those detection capabilities will be
771 # disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
772 # parameters are set to 1 to make results appear in AWStats report page.
773 # If you want to use another directory than /js/, you must also change the
774 # awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
775 # Change : Effective for new updates only.
776 # Possible value: URL of javascript tracker file added in your HTML code.
777 # Default: "/js/awstats_misc_tracker.js"
778 #
779 MiscTrackerUrl="/js/awstats_misc_tracker.js"
780
781
782
783 #-----------------------------------------------------------------------------
784 # OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
785 #-----------------------------------------------------------------------------
786
787 # The following values allow you to define accuracy of AWStats entities
788 # (robots, browsers, os, referers, file types) detection.
789 # It might be a good idea for large web sites or ISP that provides AWStats to
790 # high number of customers, to set this parameter to 1 (or 0), instead of 2.
791 # Possible values:
792 # 0 = No detection,
793 # 1 = Medium/Standard detection
794 # 2 = Full detection
795 # Change : Effective for new updates only
796 # Note : LevelForBrowsersDetection can also accept value "allphones". This
797 # enable detailed detection of phone/pda browsers.
798 # Default: 2 (0 for LevelForWormsDetection)
799 #
800 LevelForBrowsersDetection=2 # 0 disables Browsers detection.
801 # 2 reduces AWStats speed by 2%
802 # allphones reduces AWStats speed by 5%
803 LevelForOSDetection=2 # 0 disables OS detection.
804 # 2 reduces AWStats speed by 3%
805 LevelForRefererAnalyze=2 # 0 disables Origin detection.
806 # 2 reduces AWStats speed by 14%
807 LevelForRobotsDetection=2 # 0 disables Robots detection.
808 # 2 reduces AWStats speed by 2.5%
809 LevelForSearchEnginesDetection=2 # 0 disables Search engines detection.
810 # 2 reduces AWStats speed by 9%
811 LevelForKeywordsDetection=2 # 0 disables Keyphrases/Keywords detection.
812 # 2 reduces AWStats speed by 1%
813 LevelForFileTypesDetection=2 # 0 disables File types detection.
814 # 2 reduces AWStats speed by 1%
815 LevelForWormsDetection=0 # 0 disables Worms detection.
816 # 2 reduces AWStats speed by 15%
817
818
819
820 #-----------------------------------------------------------------------------
821 # OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
822 #-----------------------------------------------------------------------------
823
824 # When you use AWStats as a CGI, you can have the reports shown in HTML frames.
825 # Frames are only available for report viewed dynamically. When you build
826 # pages from command line, this option is not used and no frames are built.
827 # Possible values: 0 or 1
828 # Default: 1
829 #
830 UseFramesWhenCGI=1
831
832
833 # This parameter asks your browser to open detailed reports into a different
834 # window than the main page.
835 # Possible values:
836 # 0 - Open all in same browser window
837 # 1 - Open detailed reports in another window except if using frames
838 # 2 - Open always in a different window even if reports are framed
839 # Default: 1
840 #
841 DetailedReportsOnNewWindows=1
842
843
844 # You can add, in the HTML report page, a cache lifetime (in seconds) that
845 # will be returned to the browser in HTTP header answer by server.
846 # This parameter is not used when reports are built with -staticlinks option.
847 # Example: 3600
848 # Default: 0
849 #
850 Expires=0
851
852
853 # To avoid too large web pages, you can ask AWStats to limit number of rows of
854 # all reported charts to this number when no other limits apply.
855 # Default: 1000
856 #
857 MaxRowsInHTMLOutput=1000
858
859
860 # Set your primary language (ISO-639-1 language codes).
861 # Possible values:
862 # Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
863 # Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
864 # Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
865 # French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
866 # Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
867 # Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
868 # Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
869 # Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
870 # Ukrainian=ua, Welsh=cy.
871 # First available language accepted by browser=auto
872 # Default: "auto"
873 #
874 Lang="auto"
875
876
877 # Set the location of language files.
878 # Example: "/usr/share/awstats/lang"
879 # Default: "./lang" (means lang directory is in same location than awstats.pl)
880 #
881 DirLang="./lang"
882
883
884 # Show menu header with reports' links
885 # Possible values: 0 or 1
886 # Default: 1
887 #
888 ShowMenu=1
889
890
891 # You choose here which reports you want to see in the main page and what you
892 # want to see in those reports.
893 # Possible values:
894 # 0 - Report is not shown at all
895 # 1 - Report is shown in main page with an entry in menu and default columns
896 # XYZ - Report shows column informations defined by code X,Y,Z...
897 # X,Y,Z... are code letters among the following:
898 # U = Unique visitors
899 # V = Visits
900 # P = Number of pages
901 # H = Number of hits (or mails)
902 # B = Bandwith (or total mail size for mail logs)
903 # L = Last access date
904 # E = Entry pages
905 # X = Exit pages
906 # C = Web compression (mod_gzip,mod_deflate)
907 # M = Average mail size (mail logs)
908 #
909
910 # Show monthly summary
911 # Context: Web, Streaming, Mail, Ftp
912 # Default: UVPHB, Possible column codes: UVPHB
913 ShowSummary=UVPHB
914
915 # Show monthly chart
916 # Context: Web, Streaming, Mail, Ftp
917 # Default: UVPHB, Possible column codes: UVPHB
918 ShowMonthStats=UVPHB
919
920 # Show days of month chart
921 # Context: Web, Streaming, Mail, Ftp
922 # Default: VPHB, Possible column codes: VPHB
923 ShowDaysOfMonthStats=VPHB
924
925 # Show days of week chart
926 # Context: Web, Streaming, Mail, Ftp
927 # Default: PHB, Possible column codes: PHB
928 ShowDaysOfWeekStats=PHB
929
930 # Show hourly chart
931 # Context: Web, Streaming, Mail, Ftp
932 # Default: PHB, Possible column codes: PHB
933 ShowHoursStats=PHB
934
935 # Show domains/country chart
936 # Context: Web, Streaming, Mail, Ftp
937 # Default: PHB, Possible column codes: PHB
938 ShowDomainsStats=PHB
939
940 # Show hosts chart
941 # Context: Web, Streaming, Mail, Ftp
942 # Default: PHBL, Possible column codes: PHBL
943 ShowHostsStats=PHBL
944
945 # Show authenticated users chart
946 # Context: Web, Streaming, Ftp
947 # Default: 0, Possible column codes: PHBL
948 ShowAuthenticatedUsers=0
949
950 # Show robots chart
951 # Context: Web, Streaming
952 # Default: HBL, Possible column codes: HBL
953 ShowRobotsStats=HBL
954
955 # Show worms chart
956 # Context: Web, Streaming
957 # Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
958 ShowWormsStats=0
959
960 # Show email senders chart (For use when analyzing mail log files)
961 # Context: Mail
962 # Default: 0, Possible column codes: HBML
963 ShowEMailSenders=0
964
965 # Show email receivers chart (For use when analyzing mail log files)
966 # Context: Mail
967 # Default: 0, Possible column codes: HBML
968 ShowEMailReceivers=0
969
970 # Show session chart
971 # Context: Web, Streaming, Ftp
972 # Default: 1, Possible column codes: None
973 ShowSessionsStats=1
974
975 # Show pages-url chart.
976 # Context: Web, Streaming, Ftp
977 # Default: PBEX, Possible column codes: PBEX
978 ShowPagesStats=PBEX
979
980 # Show file types chart.
981 # Context: Web, Streaming, Ftp
982 # Default: HB, Possible column codes: HBC
983 ShowFileTypesStats=HB
984
985 # Show file size chart (Not yet available)
986 # Context: Web, Streaming, Mail, Ftp
987 # Default: 1, Possible column codes: None
988 ShowFileSizesStats=0
989
990 # Show operating systems chart
991 # Context: Web, Streaming, Ftp
992 # Default: 1, Possible column codes: None
993 ShowOSStats=1
994
995 # Show browsers chart
996 # Context: Web, Streaming
997 # Default: 1, Possible column codes: None
998 ShowBrowsersStats=1
999
1000 # Show screen size chart
1001 # Context: Web, Streaming
1002 # Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
1003 ShowScreenSizeStats=0
1004
1005 # Show origin chart
1006 # Context: Web, Streaming
1007 # Default: PH, Possible column codes: PH
1008 ShowOriginStats=PH
1009
1010 # Show keyphrases chart
1011 # Context: Web, Streaming
1012 # Default: 1, Possible column codes: None
1013 ShowKeyphrasesStats=1
1014
1015 # Show keywords chart
1016 # Context: Web, Streaming
1017 # Default: 1, Possible column codes: None
1018 ShowKeywordsStats=1
1019
1020 # Show misc chart
1021 # Context: Web, Streaming
1022 # Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrq wp
1023 ShowMiscStats=a
1024
1025 # Show http errors chart
1026 # Context: Web, Streaming
1027 # Default: 1, Possible column codes: None
1028 ShowHTTPErrorsStats=1
1029
1030 # Show smtp errors chart (For use when analyzing mail log files)
1031 # Context: Mail
1032 # Default: 0, Possible column codes: None
1033 ShowSMTPErrorsStats=0
1034
1035 # Show the cluster report (Your LogFormat must contains the %cluster tag)
1036 # Context: Web, Streaming, Ftp
1037 # Default: 0, Possible column codes: PHB
1038 ShowClusterStats=0
1039
1040
1041 # Some graphical reports are followed by the data array of values.
1042 # If you don't want this array (to reduce the report size for example), you
1043 # can set thoose options to 0.
1044 # Possible values: 0 or 1
1045 # Default: 1
1046 #
1047 # Data array values for the ShowMonthStats report
1048 AddDataArrayMonthStats=1
1049 # Data array values for the ShowDaysOfMonthStats report
1050 AddDataArrayShowDaysOfMonthStats=1
1051 # Data array values for the ShowDaysOfWeekStats report
1052 AddDataArrayShowDaysOfWeekStats=1
1053 # Data array values for the ShowHoursStats report
1054 AddDataArrayShowHoursStats=1
1055
1056
1057 # In the Origin chart, you have stats on where your hits came from. You can
1058 # include hits on pages that come from pages of same sites in this chart.
1059 # Possible values: 0 or 1
1060 # Default: 0
1061 #
1062 IncludeInternalLinksInOriginSection=0
1063
1064
1065 # The following parameters can be used to choose the maximum number of lines
1066 # shown for the particular following reports.
1067 #
1068 # Stats by countries/domains
1069 MaxNbOfDomain = 10
1070 MinHitDomain = 1
1071 # Stats by hosts
1072 MaxNbOfHostsShown = 10
1073 MinHitHost = 1
1074 # Stats by authenticated users
1075 MaxNbOfLoginShown = 10
1076 MinHitLogin = 1
1077 # Stats by robots
1078 MaxNbOfRobotShown = 10
1079 MinHitRobot = 1
1080 # Stats by pages
1081 MaxNbOfPageShown = 10
1082 MinHitFile = 1
1083 # Stats by OS
1084 MaxNbOfOsShown = 10
1085 MinHitOs = 1
1086 # Stats by browsers
1087 MaxNbOfBrowsersShown = 10
1088 MinHitBrowser = 1
1089 # Stats by screen size
1090 MaxNbOfScreenSizesShown = 5
1091 MinHitScreenSize = 1
1092 # Stats by window size (following 2 parameters are not yet used)
1093 MaxNbOfWindowSizesShown = 5
1094 MinHitWindowSize = 1
1095 # Stats by referers
1096 MaxNbOfRefererShown = 10
1097 MinHitRefer = 1
1098 # Stats for keyphrases
1099 MaxNbOfKeyphrasesShown = 10
1100 MinHitKeyphrase = 1
1101 # Stats for keywords
1102 MaxNbOfKeywordsShown = 10
1103 MinHitKeyword = 1
1104 # Stats for sender or receiver emails
1105 MaxNbOfEMailsShown = 20
1106 MinHitEMail = 1
1107
1108
1109 # Choose if you want the week report to start on sunday or monday
1110 # Possible values:
1111 # 0 - Week starts on sunday
1112 # 1 - Week starts on monday
1113 # Default: 1
1114 #
1115 FirstDayOfWeek=1
1116
1117
1118 # List of visible flags that link to other language translations.
1119 # See Lang parameter for list of allowed flag/language codes.
1120 # If you don't want any flag link, set ShowFlagLinks to "".
1121 # This parameter is used only if ShowMenu parameter is set to 1.
1122 # Possible values: "" or "language_codes_separated_by_space"
1123 # Example: "en es fr nl de"
1124 # Default: ""
1125 #
1126 ShowFlagLinks=""
1127
1128
1129 # Each URL, shown in stats report views, are links you can click.
1130 # Possible values: 0 or 1
1131 # Default: 1
1132 #
1133 ShowLinksOnUrl=1
1134
1135
1136 # When AWStats builds HTML links in its report pages, it starts those links
1137 # with "http://". However some links might be HTTPS links, so you can enter
1138 # here the root of all your HTTPS links. If all your site is a SSL web site,
1139 # just enter "/".
1140 # This parameter is not used if ShowLinksOnUrl is 0.
1141 # Example: "/shopping"
1142 # Example: "/"
1143 # Default: ""
1144 #
1145 UseHTTPSLinkForUrl=""
1146
1147
1148 # Maximum length of URL part shown on stats page (number of characters).
1149 # This affects only URL visible text, links still work.
1150 # Default: 64
1151 #
1152 MaxLengthOfShownURL=64
1153
1154
1155 # You can enter HTML code that will be added at the top of AWStats reports.
1156 # Default: ""
1157 #
1158 HTMLHeadSection=""
1159
1160
1161 # You can enter HTML code that will be added at the end of AWStats reports.
1162 # Great to add advert ban.
1163 # Default: ""
1164 #
1165 HTMLEndSection=""
1166
1167
1168 # You can set Logo and LogoLink to use your own logo.
1169 # Logo must be the name of image file (must be in $DirIcons/other directory).
1170 # LogoLink is the expected URL when clicking on Logo.
1171 # Default: "awstats_logo6.png"
1172 #
1173 Logo="awstats_logo6.png"
1174 LogoLink="http://awstats.sourceforge.net"
1175
1176
1177 # Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
1178 # Default: 260/90
1179 #
1180 BarWidth = 260
1181 BarHeight = 90
1182
1183
1184 # You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
1185 # change its look. To create a style sheet, you can use samples provided with
1186 # AWStats in wwwroot/css directory.
1187 # Example: "/awstatscss/awstats_bw.css"
1188 # Example: "/css/awstats_bw.css"
1189 # Default: ""
1190 #
1191 StyleSheet=""
1192
1193
1194 # Those color parameters can be used (if StyleSheet parameter is not used)
1195 # to change AWStats look.
1196 # Example: color_name="RRGGBB" # RRGGBB is Red Green Blue components in Hex
1197 #
1198 color_Background="FFFFFF" # Background color for main page (Default = "FFFFFF" )
1199 color_TableBGTitle="CCCCDD" # Background color for table title (Default = "CCC CDD")
1200 color_TableTitle="000000" # Table title font color (Default = "000000")
1201 color_TableBG="CCCCDD" # Background color for table (Default = "CCCCDD")
1202 color_TableRowTitle="FFFFFF" # Table row title font color (Default = "FFFFFF")
1203 color_TableBGRowTitle="ECECEC" # Background color for row title (Default = "ECE CEC")
1204 color_TableBorder="ECECEC" # Table border color (Default = "ECECEC")
1205 color_text="000000" # Color of text (Default = "000000")
1206 color_textpercent="606060" # Color of text for percent values (Default = "606 060")
1207 color_titletext="000000" # Color of text title within colored Title Rows (Def ault = "000000")
1208 color_weekend="EAEAEA" # Color for week-end days (Default = "EAEAEA")
1209 color_link="0011BB" # Color of HTML links (Default = "0011BB")
1210 color_hover="605040" # Color of HTML on-mouseover links (Default = "605040" )
1211 color_u="FFAA66" # Background color for number of unique visitors (Defaul t = "FFAA66")
1212 color_v="F4F090" # Background color for number of visites (Default = "F4F 090")
1213 color_p="4477DD" # Background color for number of pages (Default = "4477D D")
1214 color_h="66DDEE" # Background color for number of hits (Default = "66DDEE ")
1215 color_k="2EA495" # Background color for number of bytes (Default = "2EA49 5")
1216 color_s="8888DD" # Background color for number of search (Default = "8888 DD")
1217 color_e="CEC2E8" # Background color for number of entry pages (Default = "CEC2E8")
1218 color_x="C1B2E2" # Background color for number of exit pages (Default = " C1B2E2")
1219
1220
1221
1222 #-----------------------------------------------------------------------------
1223 # PLUGINS
1224 #-----------------------------------------------------------------------------
1225
1226 # Add here all plugin files you want to load.
1227 # Plugin files must be .pm files stored in 'plugins' directory.
1228 # Uncomment LoadPlugin lines to enable a plugin after checking that perl
1229 # modules required by the plugin are installed.
1230
1231 # Plugin: Tooltips
1232 # Perl modules required: None
1233 # Add some tooltips help on HTML report pages.
1234 # Note that enabling this kind of help will increased HTML report pages size,
1235 # so server load and bandwidth.
1236 #
1237 #LoadPlugin="tooltips"
1238
1239 # Plugin: DecodeUTFKeys
1240 # Perl modules required: Encode and URI::Escape
1241 # Allow AWStats to show correctly (in language charset) keywords/keyphrases
1242 # strings even if they were UTF8 coded by the referer search engine.
1243 #
1244 #LoadPlugin="decodeutfkeys"
1245
1246 # Plugin: IPv6
1247 # Perl modules required: Net::IP and Net::DNS
1248 # This plugin gives AWStats capability to make reverse DNS lookup on IPv6
1249 # addresses.
1250 # Note: If you are interested in having country report, you should use the
1251 # geoipfree or geoip plugin instead of enabled reverse DNS lookup.
1252 #
1253 #LoadPlugin="ipv6"
1254
1255 # Plugin: HashFiles
1256 # Perl modules required: Storable
1257 # AWStats DNS cache files are read/saved as native hash files. This increases
1258 # DNS cache files loading speed, above all for very large web sites.
1259 #
1260 #LoadPlugin="hashfiles"
1261
1262 # Plugin: GeoIP
1263 # Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
1264 # Country chart is built from an Internet IP-Country database.
1265 # This plugin is useless for intranet only log files.
1266 # Note: You must choose between using this plugin (need Perl Geo::IP module
1267 # from Maxmind, database more up to date) or the GeoIPfree plugin (need
1268 # Perl Geo::IPfree module, database less up to date).
1269 # This plugin reduces AWStats speed of 8% !
1270 #
1271 LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
1272
1273 # Plugin: GeoIPfree
1274 # Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
1275 # Country chart is built from an Internet IP-Country database.
1276 # This plugin is useless for intranet only log files.
1277 # Note: You must choose between using this plugin (need Perl Geo::IPfree
1278 # module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
1279 # module from Maxmind, database more up to date).
1280 # Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
1281 # module, so install it from elsewhere (from www.cpan.org for example).
1282 # This plugin reduces AWStats speed of 10% !
1283 #
1284 #LoadPlugin="geoipfree"
1285
1286 # Plugin: GeoIP_Region_Maxmind
1287 # Perl modules required: Geo::IP (from Maxmind)
1288 # This plugin add a chart of hits by regions. Only regions for US and
1289 # Canada can be detected.
1290 # Note: This plugin need Maxmind GeoIP Perl module AND the region database.
1291 # Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
1292 # on Windows but it works great on Linux with default Perl.
1293 # You need to purchase a license from Maxmind to get/use the Region database.
1294 # This plugin reduces AWStats speed.
1295 #
1296 #LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
1297
1298 # Plugin: GeoIP_City_Maxmind
1299 # Perl modules required: Geo::IP (from Maxmind)
1300 # This plugin add a chart of hits by cities (with country and regions
1301 # informations for major countries).
1302 # Note: This plugin need Maxmind GeoIP Perl module AND the city database.
1303 # Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
1304 # on Windows but it works great on Linux with default Perl.
1305 # You need to purchase a license from Maxmind to get/use the City database.
1306 # This plugin reduces AWStats speed.
1307 #
1308 LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /usr/share/GeoIP/GeoIPCity.dat"
1309
1310 # Plugin: GeoIP_ISP_Maxmind
1311 # Perl modules required: Geo::IP (from Maxmind)
1312 # This plugin add a chart of hits by ISP.
1313 # Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
1314 # Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
1315 # on Windows but it works great on Linux with default Perl.
1316 # You need to purchase a license from Maxmind to get/use the ISP database.
1317 # This plugin reduces AWStats speed.
1318 #
1319 #LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
1320
1321 # Plugin: GeoIP_Org_Maxmind
1322 # Perl modules required: Geo::IP (from Maxmind)
1323 # This plugin add a chart of hits by Organization name
1324 # Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
1325 # Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
1326 # on Windows but it works great on Linux with default Perl.
1327 # You need to purchase a license from Maxmind to get/use the Org database.
1328 # This plugin reduces AWStats speed.
1329 #
1330 #LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
1331
1332 # Plugin: UserInfo
1333 # Perl modules required: None
1334 # Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
1335 # reports for each login value.
1336 # A text file called userinfo.myconfig.txt, with two fields (first is login,
1337 # second is text to show, separated by a tab char) must be created in DirData
1338 # directory.
1339 #
1340 #LoadPlugin="userinfo"
1341
1342 # Plugin: HostInfo
1343 # Perl modules required: Net::XWhois
1344 # Add a column into host chart with a link to open a popup window that shows
1345 # info on host (like whois records).
1346 #
1347 #LoadPlugin="hostinfo"
1348
1349 # Plugin: ClusterInfo
1350 # Perl modules required: None
1351 # Add a text (for example a full hostname) in cluster reports for each cluster
1352 # number.
1353 # A text file called clusterinfo.myconfig.txt, with two fields (first is
1354 # cluster number, second is text to show) separated by a tab char. must be
1355 # created into DirData directory.
1356 # Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
1357 # use a personalized log format that contains %cluster tag.
1358 #
1359 #LoadPlugin="clusterinfo"
1360
1361 # Plugin: UrlAliases
1362 # Perl modules required: None
1363 # Add a text (Page title, description...) in URL reports before URL value.
1364 # A text file called urlalias.myconfig.txt, with two fields (first is URL,
1365 # second is text to show, separated by a tab char) must be created into
1366 # DirData directory.
1367 #
1368 #LoadPlugin="urlalias"
1369
1370 # Plugin: TimeHiRes
1371 # Perl modules required: Time::HiRes (if Perl < 5.8)
1372 # Time reported by -showsteps option is in millisecond. For debug purpose.
1373 #
1374 #LoadPlugin="timehires"
1375
1376 # Plugin: TimeZone
1377 # Perl modules required: Time::Local
1378 # Allow AWStats to correct a bad timezone for user of some IIS that use
1379 # GMT date in its log instead of local server time.
1380 # This module is useless for Apache and most IIS version.
1381 # This plugin reduces AWStats speed of 40% !!!!!!!
1382 #
1383 #LoadPlugin="timezone +2"
1384
1385 # Plugin: Rawlog
1386 # Perl modules required: None
1387 # This plugin adds a form in AWStats main page to allow users to see raw
1388 # content of current log files. A filter is also available.
1389 #
1390 #LoadPlugin="rawlog"
1391
1392 # Plugin: GraphApplet
1393 # Perl modules required: None
1394 # Supported charts are built by a 3D graphic applet.
1395 #
1396 #LoadPlugin="graphapplet /awstatsclasses" # EXPERIMENTAL FEATURE
1397
1398
1399
1400 #-----------------------------------------------------------------------------
1401 # EXTRA SECTIONS
1402 #-----------------------------------------------------------------------------
1403
1404 # You can define your own charts, you choose here what are rows and columns
1405 # keys. This feature is particularly useful for marketing purpose, tracking
1406 # products orders for example.
1407 # For this, edit all parameters of Extra section. Each set of parameter is a
1408 # different chart. For several charts, duplicate section changing the number.
1409 # Note: Each Extra section reduces AWStats speed by 8%.
1410 #
1411 # WARNING: A wrong setup of Extra section might result in too large arrays
1412 # that will consume all your memory, making AWStats unusable after several
1413 # updates, so be sure to setup it correctly.
1414 # In most cases, you don't need this feature.
1415 #
1416 # ExtraSectionNameX is title of your personalized chart.
1417 # ExtraSectionCodeFilterX is list of codes the record code field must match.
1418 # Put an empty string for no test on code.
1419 # ExtraSectionConditionX are conditions you can use to count or not the hit,
1420 # Use one of the field condition
1421 # (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
1422 # and a regex to match, after a coma. Use "||" for "OR".
1423 # ExtraSectionFirstColumnTitleX is the first column title of the chart.
1424 # ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
1425 # extract value from
1426 # (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
1427 # and how to extract the value (using regex syntax). Each different value
1428 # found will appear in first column of report on a different row. Be sure
1429 # that list of different possible values will not grow indefinitely.
1430 # ExtraSectionFirstColumnFormatX is the string used to write value.
1431 # ExtraSectionStatTypesX are things you want to count. You can use standard
1432 # code letters (P for pages,H for hits,B for bandwidth,L for last access).
1433 # ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
1434 # ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
1435 # MaxNbOfExtraX is maximum number of rows shown in chart.
1436 # MinHitExtraX is minimum number of hits required to be shown in chart.
1437 #
1438
1439 # Example to report the 20 products the most ordered by "order.cgi" script
1440 #ExtraSectionName1="Product orders"
1441 #ExtraSectionCodeFilter1="200 304"
1442 #ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi "
1443 #ExtraSectionFirstColumnTitle1="Product ID"
1444 #ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
1445 #ExtraSectionFirstColumnFormat1="%s"
1446 #ExtraSectionStatTypes1=PL
1447 #ExtraSectionAddAverageRow1=0
1448 #ExtraSectionAddSumRow1=1
1449 #MaxNbOfExtra1=20
1450 #MinHitExtra1=1
1451
1452
1453 # There is also a global parameter ExtraTrackedRowsLimit that limits the
1454 # number of possible rows an ExtraSection can report. This parameter is
1455 # here to protect too much memory use when you make a bad setup in your
1456 # ExtraSection. It applies to all ExtraSection independently meaning that
1457 # none ExtraSection can report more rows than value defined by ExtraTrackedRowsL imit.
1458 # If you know an ExtraSection will report more rows than its value, you should
1459 # increase this parameter or AWStats will stop with an error.
1460 # Example: 2000
1461 # Default: 500
1462 #
1463 ExtraTrackedRowsLimit=500
1464
1465
1466 #-----------------------------------------------------------------------------
1467 # INCLUDES
1468 #-----------------------------------------------------------------------------
1469
1470 # You can include other config files using the directive with the name of the
1471 # config file.
1472 # This is particularly useful for users who have a lot of virtual servers, so
1473 # a lot of config files and want to maintain common values in only one file.
1474 # Note that when a variable is defined both in a config file and in an
1475 # included file, AWStats will use the last value read for parameters that
1476 # contains one value and AWStats will concat all values from both files for
1477 # parameters that are lists of values.
1478 #
1479
1480 #Include ""
OLDNEW

Powered by Google App Engine
This is Rietveld